• Photovoltaik-Converter PH

    The Photovoltaic E-Smog Converter is for photovoltaic systems, which can be found in homes, stables, offices and school buildings among other places. The electro-smog of a photovoltaic system is produced, in disturbing quantities, where the "harmless" direct current is turned into alternating current - this occurs in the inverter. The Photovoltaic E-Smog Contents is attached directly onto the inverter of the photovoltaic system. One Photovoltaic E-Smog Converter is needed per inverter.

    Service life: a minimum of 30 years

    Read more

    Product details

    Photovoltaic Converter – how it works!
    With the bioresonance and HRV measurement methods, the electro-smog from a photovoltaic inverter can be verified upto a distance of 50 m. The influence on the physique of all living things (humans, animals, plants) is, in part, invasive. By vitalising the frequency, transforming it into a bioresonance wave, the cell frequency of the inhabitants is optimised. The field around the self Regulation (self regulation) is activated in this way.

    Testing evidence and measurements

    The first measurement was taken before installing the i-like photovoltaic converter on the system’s inverter. The second measurement was taken 30-45 minutes after the installation of the converter.

    Measurement Part 1:
    Health measurement: General state of health (Health). The mixed probability calculation of all relevant data of the overview measurement is being formulated. This shows a general tendency of potentials. Red indicates deficiency signs. Green indicates vital measurement results. Blue indicates the statistical mean value of the specified age (date of birth).

    Individual 1, male, born in 1961. Monday, February 22nd, 2016 Health measurement, base point at 9% shows significant deficiency signs and a high stress level. 30 minutes after the activation with the photovoltaic converter, the level is already above normal level.

    Measurement Part 2:
    Four sections: A - Adaptation level (adaptability of the body/resilience measurement), B - Vegetative and C - Central control systems, D - Psycho-emotional status (stress level). Evaluation: the higher the measured data, the more stable the condition.

    Individual 2, female, born in 1964. Monday, February 22nd, 2016 4-fields measurement base point level normal, psycho-emotional status shows stress. 45 minutes after activation with the photovoltaic converter, better levels in all areas have been detected. Vegetative regulation (autonomous control of body functions) at the maximum, stress levels significantly more stable.

    Conclusion:
    Use the electric smog of your system to vitalize the frequency by utilizing the worldwide unique i-like technology. This neutralizes interference frequencies and transforms the inverter into a bioresonance radiation source. Convert your photovoltaic system into a bioresonance system!

    CHF590.00 incl. VAT
    -
    +
    10140 Photovoltaik-Converter 1x
    CHF590.00
    -
    +

The Photovoltaic E-Smog Converter is for photovoltaic systems, which can be found in homes, stables, offices and school buildings among other places. The electro-smog of a photovoltaic system is produced, in disturbing quantities, where the "harmless" direct current is turned into alternating current - this occurs in the inverter. The Photovoltaic E-Smog Contents is attached directly onto the inverter of the photovoltaic system. One Photovoltaic E-Smog Converter is needed per inverter.

Service life: a minimum of 30 years

Read more

Product details

Photovoltaic Converter – how it works!
With the bioresonance and HRV measurement methods, the electro-smog from a photovoltaic inverter can be verified upto a distance of 50 m. The influence on the physique of all living things (humans, animals, plants) is, in part, invasive. By vitalising the frequency, transforming it into a bioresonance wave, the cell frequency of the inhabitants is optimised. The field around the self Regulation (self regulation) is activated in this way.

Testing evidence and measurements

The first measurement was taken before installing the i-like photovoltaic converter on the system’s inverter. The second measurement was taken 30-45 minutes after the installation of the converter.

Measurement Part 1:
Health measurement: General state of health (Health). The mixed probability calculation of all relevant data of the overview measurement is being formulated. This shows a general tendency of potentials. Red indicates deficiency signs. Green indicates vital measurement results. Blue indicates the statistical mean value of the specified age (date of birth).

Individual 1, male, born in 1961. Monday, February 22nd, 2016 Health measurement, base point at 9% shows significant deficiency signs and a high stress level. 30 minutes after the activation with the photovoltaic converter, the level is already above normal level.

Measurement Part 2:
Four sections: A - Adaptation level (adaptability of the body/resilience measurement), B - Vegetative and C - Central control systems, D - Psycho-emotional status (stress level). Evaluation: the higher the measured data, the more stable the condition.

Individual 2, female, born in 1964. Monday, February 22nd, 2016 4-fields measurement base point level normal, psycho-emotional status shows stress. 45 minutes after activation with the photovoltaic converter, better levels in all areas have been detected. Vegetative regulation (autonomous control of body functions) at the maximum, stress levels significantly more stable.

Conclusion:
Use the electric smog of your system to vitalize the frequency by utilizing the worldwide unique i-like technology. This neutralizes interference frequencies and transforms the inverter into a bioresonance radiation source. Convert your photovoltaic system into a bioresonance system!

  • 5G-Mobile Converter 5g

    The new technology presents a person‘s cell information with many new challenges. The potential of stray fields, which can negatively influence the scalar information, is 50 to 100 times higher than with previous mobile radio networks. The 5G-Mobile Converter vitalises the negative frequencies of 5G mobile networks including e-smog.

    Service life: a minimum of 30 years

    Read more

     

    Product details

    5G, also known as „Fifth Generation“, is the latest generation of mobile communications. It no longer operates at 2.5 GHZ, but now at 100 GHZ, i.e. it is 40 times faster than before. In addition, the radio power was significantly increased.

    Any 5G mobile device that effects your body for long periods on a daily basis should be vitalised! The 5G-Mobile Converter is activated by an electromagnetic wave, i.e. an electronic device.

    Application
    Simply attach the 5G-Mobile Converter into your mobile phone, digital radios and other 5G devices and let it work. Remove the foil from the back of the 5G-Mobile Converter and insert the converter onto the selected 5G mobile device.
    -
    +
    10105 5G-Mobile Converter 1x
    CHF89.00
    -
    +
  • Bamboo-Vitalplasters VP10

    Active-Bioresonance Bamboo-Vitalplasters are easy to use, highly effective and let the user quickly sense, what changes can be achieved. The first night can be an experience in itself. Simple „stick on and experience.“

    Product details

    Use
    Stick Active-Bioresonance Bamboo-Vitalplasters onto your washed feet each night for 30 nights. After sleeping the patches may be removed. They are usually soaked and slaggy-brown. But purely energetic changes are also noticeable.

    In addition to the main application in the middle of the sole of the foot, there are almost countless other points on feet, legs as well as on the whole body, which can be activated with the Active-Bioresonance Bamboo-Vitalplasters. The possibilities can be elucidated in technical literature, as well as via the personal advice of consultants.







    Testing evidence and measurements

    This study shows what pH level changes can take place in a patch before and after use.

    Before application
    The pH value of a new plaster is about 7.8 - 8.0 = basic    		 After application
    The pH value of a used plaster is around 3.8 - 4.8 = a large amount of acid was excreted overnight

    Ingredients
    Phyllostachys bambusoides, Agaricus blazei, Houttuynia Cordata, Zingiber officinale, Mespilus germanica, Artemisia absinthium L., Tetradium daniellii, Tourmaline, Mineralium, Vestigium elementa, Vitaminum C, Vitaminum E

    -
    +
    50010 10x Vitalpflaster 1x
    CHF34.90
    -
    +
  • Bamboo-Vitalplasters VP10

    Active-Bioresonance Bamboo-Vitalplasters are easy to use, highly effective and let the user quickly sense, what changes can be achieved. The first night can be an experience in itself. Simple „stick on and experience.“

    Product details

    Use
    Stick Active-Bioresonance Bamboo-Vitalplasters onto your washed feet each night for 30 nights. After sleeping the patches may be removed. They are usually soaked and slaggy-brown. But purely energetic changes are also noticeable.

    In addition to the main application in the middle of the sole of the foot, there are almost countless other points on feet, legs as well as on the whole body, which can be activated with the Active-Bioresonance Bamboo-Vitalplasters. The possibilities can be elucidated in technical literature, as well as via the personal advice of consultants.







    Testing evidence and measurements

    This study shows what pH level changes can take place in a patch before and after use.

    Before application
    The pH value of a new plaster is about 7.8 - 8.0 = basic    		 After application
    The pH value of a used plaster is around 3.8 - 4.8 = a large amount of acid was excreted overnight

    Ingredients
    Phyllostachys bambusoides, Agaricus blazei, Houttuynia Cordata, Zingiber officinale, Mespilus germanica, Artemisia absinthium L., Tetradium daniellii, Tourmaline, Mineralium, Vestigium elementa, Vitaminum C, Vitaminum E

    -
    +
    50010 10x Vitalpflaster 1x
    CHF34.90
    -
    +
Scroll